Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Which is best for IR drop analysis Galaxy power,Prime rail and PT Px4?

Status
Not open for further replies.
N

naren_tapaswi

Newbie level 3
Newbie level 3
Joined
Sep 17, 2012
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
Hi ,
What is the difference between Galaxy power, prime rail and PT Px4 tools.What actually will Galaxy power do? Which is best for IR drop analysis. For initial trail IR drop analysis, will Galaxy power is helpful?

Thanks in advance
Naren Tapaswi
 

Apache RedHawk is best for IR Drop analysis.
 

Hi,
Thanks for the reply. In our company, we are recommended to use synopsys tools. Please can you tell me the difference between galaxy power, prime rail and PT Px4 ?

Thanks
Naren Tapaswi
 

As previous user told, redhawk is quite close to SPICE simulated values. Next comes Encounter Power System (from cadence).

A Big no for Primerail + PTPX combo at this point of time, as we have scenarios where the tool is unable to understand some of CCS constructs in .lib itself.
I hope synopsys fixes it soon.

u can still , get away if u are running static IR drop, but Primerail + PTPX combo is very very pessimestic , u will end up overdesigning your Power Ground Network
 
Hi,

Can PrimeRail be used as a standalone tool and take design data (verilog/def/spef etc) from other P&R tools, like Encounter, and run IR drop analysis?

Or, does it only work with Milkyway design database from ICC?

Thanks,
Ted
 

The most easiest way would be to create a milkyway database.

if u already have an ICC db , dump it from there.
else if u use another third party PNR tool, take the design data & create a milkyway db.

this would be far easier to setup up the flow & would be more easier to debug, incase of any issue. its better to start with mw db
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top