Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Looking for a circuit simulator (pspice) program.

Status
Not open for further replies.

xxtigerxx

Advanced Member level 1
Advanced Member level 1
Joined
Jun 5, 2001
Messages
441
Helped
38
Reputation
76
Reaction score
32
Trophy points
1,308
Location
Greece
Visit site
Activity points
2,890
Hi,

I am looking for a circuit simulator (pspice) program.

The program must be graphical and easy to use.

Thanks..
 

I know LTspice it does not a lot of devices ( parts) only linear opamp and it is difficult to use it.

I will try the isimpe.

Thanks
Does anyone know anything other?
 

You need to specify your budget and intended use. There are loads of Spice simulators available. If you find LTspice difficult to use you will struggle with the rest - LTspice is one of the simplest ones to learn. Also, you need to get used to adding models to all simulators so the fact that LTspice only comes with LT models is not important.

Keith
 

i tried isim it is very easy to use and have quite good libraries

I think that is the best choice for free spice.

You need to specify your budget and intended use. There are loads of Spice simulators available. If you find LTspice difficult to use you will struggle with the rest - LTspice is one of the simplest ones to learn. Also, you need to get used to adding models to all simulators so the fact that LTspice only comes with LT models is not important.

Keith


Keith I think with isim I am satisfy up to now. Can you please suggest me a more professional program. I need only schematic and pspice simulation.


Thanks
 

As I said before, you need to specify your budget. If you want "Pspice" then that is the version of Spice sold by Orcad (now part of Cadence). If you want "Spice" then there are dozens of options ranging from free ones to $100,000+

Keith
 

As I said before, you need to specify your budget. If you want "Pspice" then that is the version of Spice sold by Orcad (now part of Cadence). If you want "Spice" then there are dozens of options ranging from free ones to $100,000+

Keith

For a buget up to $5000, can you tell me a application?
 

For that sort of money Pspice would be a reasonable choice. Also, SIMetrix would be worth looking at. There are others but they are two that I have used. It partly depends on what you want to design with it - for example, do you want to do analogue or mixed signal IC design or only the design of discrete circuitry?

Also, the most expensive packages are not necessarily the "best". Have a look at Anasoft Superspice and Beige Bag http://www.beigebag.com/ for example. Where possible get a usable demo version before you spend your money.

Keith
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top