Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

PIC 18f14k50 running from input port power?

Status
Not open for further replies.
J

johanfo

Junior Member level 1
Junior Member level 1
Joined
Jan 19, 2012
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,450
Hi,

I have a quick question I didn't find the answer to on the internet, nor in the documentation.

I have a PIC 18f14k50 up and running. To my big surprise, when I disconnected Pin1 (Vdd), the unit kept running. Obviously from the power of one of the I/O ports configured as Input (Pin9 to be specific).

Now, is this expected behaviour, or have I seriously misconfigured something?

JF
 

Probably that the power goes back to the Vdd pin through the protection diodes. If you measure the voltage on Vdd, it should be (Vdd - Vdiode).
 
You are a smart cookie! There was a 0.87v difference (Vdd was 0.87v lower than the input-port) as you predicted!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top