T
treez
Guest
Hello,
I am using the coilcraft.com LPS6235 , 10uH inductor in my buckboost design (led driver)
The inductor IRMS = 2.1A
The inductor di = 0.92
Led driver spec
vin = 11.3v
vout = ~33v
iout = 0.
fsw = 926khz
max ambient = 30degc
PCB is potted in tube the size of a thick pen......then outside this its the ambient.
The coilcraft inductor loss calculator says i will dissiapte 522mw total , and get a 64degc temp rise.
Will this be too much?
LPS6235
**broken link removed**
Inductor loss calculator
**broken link removed**
I am using the coilcraft.com LPS6235 , 10uH inductor in my buckboost design (led driver)
The inductor IRMS = 2.1A
The inductor di = 0.92
Led driver spec
vin = 11.3v
vout = ~33v
iout = 0.
fsw = 926khz
max ambient = 30degc
PCB is potted in tube the size of a thick pen......then outside this its the ambient.
The coilcraft inductor loss calculator says i will dissiapte 522mw total , and get a 64degc temp rise.
Will this be too much?
LPS6235
**broken link removed**
Inductor loss calculator
**broken link removed**