Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

question about de-emphasis filter for digital audio

Status
Not open for further replies.
C

claint

Member level 5
Member level 5
Joined
May 21, 2004
Messages
94
Helped
5
Reputation
10
Reaction score
2
Trophy points
1,288
Activity points
762
what is audio de-emphasis

Hi,all,
De-emphsis filter with (15us/50us) is included in many digital audio DAC
chips. My question is why we need de-emphasis filter, what emphasis filter is. Can you provide detailed specification about de-emphasis filter?
If it is defined in some standard,can you share me the document?

Thx in advance,
Claint
 

de-emphasis filter

Hi,

Emphasis filter are used to give emphasis in the higher frequency components on filtering process.
This filters (Pre-emphasis and De-emphasis) are used in systems in which the power spectral density of the signal decreases more rapidly than the noise power spectral density; Increasing the SNR (signal to noise ratio).
(This is the case of an DAC.)

Take a look in the graphics in the attach.
This pages (attached) are of the book "Telecommunications Engineering" J. Dunlop and D. G. Smith, by Chapman & Hall. (Good book!)

I wait to have helped
 

    C

    claint

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top