Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Oscilloscope help -- FOR ELECTRONICS REPAIRING.

Status
Not open for further replies.
P

peter_england

Full Member level 4
Full Member level 4
Joined
Jul 24, 2012
Messages
199
Helped
11
Reputation
22
Reaction score
11
Trophy points
1,298
Activity points
2,478
please give information on oscilloscopes -- what type of minimum requirement of cro in computer motherboard , laptop motherboard and smps repairing needed ?? please help regarding this ..thanks in advanced.
 

Any oscilloscope is better than no oscilloscope. (But the virtual oscilloscopes -the soundcard ones - are toys at best, I'm not considering them in this discussion).
You can buy a used oscilloscope for less than $100 so if you're serious about electronics repairing then you definitely need an oscilloscope. Just buy whatever you can afford, even if it is just a 10MHz scope, it is better than nothing. When you have more money, buy a more expensive one. I have two, and I use both.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top