Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

displaying message send by rc5 philips remote control on lcd

Status
Not open for further replies.
P

pratzz

Member level 5
Member level 5
Joined
Jun 15, 2012
Messages
83
Helped
6
Reputation
12
Reaction score
6
Trophy points
1,288
Activity points
1,781
hi,my task has been drastically modified from the last.now i have to use philips remote and attach a receiver to pic 16f877a and display the function on lcd
for example if i press key 1 then it shhould show key1 on lcd and if volume up down than corresponding msg etc.

I have two questions in mind.
my sir is gonna give me a philips remote of his tv .how can i make sure it is using rc5 protocol only.
second which receiver will do the required.

And am i gonna require an ir decoder.and what are available option?.


Thank you in advance.
 

ok pratzz its very simple
use 3 pin ir reciever and check its signal in on oscilloscope. then show me if u do ths then further use rb0 external interrupt pin for detecting rising an falling edge.
if any problem then tell
 
zia said:
ok pratzz its very simple
use 3 pin ir reciever and check its signal in on oscilloscope. then show me if u do ths then further use rb0 external interrupt pin for detecting rising an falling edge.
if any problem then tell
Click to expand...
ok,i will check it on monday at my workplace.
and can i use hs0038 as ir decoder for this?
 

i tried to check my remote by checking the output of ir decoder hs0038a2 but it didnt show any waveform at all.can anyone tell me what could be possible reason?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top