Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] C8051F330 Sending SMS

Status
Not open for further replies.

Qrios

Newbie level 6
Newbie level 6
Joined
May 3, 2012
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,356
I am making a project which will use the SILICON LABORATORIES IDE to program C8051F330 to send a sms to a number through a GSM modem. The program will send instructions through MAX232 so that the GSM modem(serial port RS232) is able to understand the program. When I press a button( in the circuit ), it will send the sms. However, I have very limited understanding on the program as it's the 1st time I am doing this. Can anybody send me the codes to do this?
If you need any other information, please pm me.
 
Last edited:

how can we help you if not know what type of modem you have?

here is some example:
**broken link removed**
instead of classic 8051 series to C8051F330 is very litle difference.....
use datasheet of F330 and datasheet of modem and all will be clear very quick!
 
  • Like
Reactions: Qrios

    Qrios

    Points: 2
    Helpful Answer Positive Rating
The Modem model I'm using is WAVECOM Q2403A. https://rainbow.com.ua/upload/files/modemi/Q2403_Spec.pdf .This is the datasheet of the Modem.

- - - Updated - - -

I'm using Silicon Laboratories IDE C compiler. (?ASlink-Warning-Undefined Global '_putchar' referenced by module 'puts') This is the error I got from the compiler.
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top