Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to select the pattern in Altium Designer10

Status
Not open for further replies.
N

ngkl99

Member level 1
Member level 1
Joined
Dec 1, 2011
Messages
40
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,559
Hi,
if pin A is connected to via A then to pin B.
there are twist and turn in pin A to via A.
I want to select all the twist and turn patterns from pin A to via A, but exclude via A.
How can I do that with minimum mouse click?

thanks!
 

Can you use CTRL+H to select connected copper and then use shift click to un-select the one's you don't need.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top