Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

meaning and solution of hfss warning

Status
Not open for further replies.

kartikkhurana

Full Member level 3
Full Member level 3
Joined
Nov 22, 2011
Messages
175
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
2,319
hi all
what do hfss mean by this and give solution to this problem
[info] Fast sweep setup, process hf3d: Too many conductors touch lumped port '1'. Consider splitting the port into multiple lumped ports (1:53:40 PM Jun 09, 2012)
[error] Fast sweep setup, process hf3d error: Matrix solver exception: out of memory, please verify Desired/Maximum RAM Limit setting.. (1:54:11 PM Jun 09, 2012)
[error] Simulation completed with execution error on server: Local Machine. (1:54:12 PM Jun 09, 2012)
kartik
 

Apparently Out of memory means your machine is not able to complete this simulation!!
I am not sure about the first one! why dont you share your .hfss file here so I can take a look!
 
[info] -> a lumped port may only touch two conductors... think signal and reference
[error] -> out of memory means HFSS ran out of available RAM and/or allotted swap space
[error] -> just lets you know that HFSS completed with an error, where the error is stated above

Have Fun
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top