mburakbaran
Member level 2
![Member level 2](/styles/images/ranks/dlevel2.gif)
Hi guys,
I'm designing a DAC where i need current sources. I've previously designed a bandgap voltage reference Vref=400mV. (1.2Vdd, 90nm tech) where sub threshold operation is used. My problem is that my DAC is based on current sources (i need 8 current sources of 16uA each and one current source for the opamp at the end - it is acting like a summing circuit-). I'd like to make this circuit operate in a wide temperature range let's say -120 celcius - 100 celcius. That is why i've used bandgap Vref. How can I convert this Vref into Iref without losing temperature independency? The bandgap voltage reference topology is attached.
Thank you all in advance.
I'm designing a DAC where i need current sources. I've previously designed a bandgap voltage reference Vref=400mV. (1.2Vdd, 90nm tech) where sub threshold operation is used. My problem is that my DAC is based on current sources (i need 8 current sources of 16uA each and one current source for the opamp at the end - it is acting like a summing circuit-). I'd like to make this circuit operate in a wide temperature range let's say -120 celcius - 100 celcius. That is why i've used bandgap Vref. How can I convert this Vref into Iref without losing temperature independency? The bandgap voltage reference topology is attached.
Thank you all in advance.