Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Altium PCB Component pads

Status
Not open for further replies.
R

redlink

Newbie level 3
Newbie level 3
Joined
Feb 24, 2011
Messages
4
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,307
Anyone knows if is possible on PCB remove unused component pad? In the schematic is possible hide the pin and its attributes, but is possible do the same thing on the PCB?

Thanks.
 

if there is a component and you want to remove some pads there are several ways:
1)go to schematic library of the component and remove pads you want to remove
2)after double click on pads you want to remove,alter the hole size and X-Y of the pads to zero
3)after double click on pad you can change the net of that pad to NO NET
 
yaghoubi said:
if there is a component and you want to remove some pads there are several ways:
1)go to schematic library of the component and remove pads you want to remove
2)after double click on pads you want to remove,alter the hole size and X-Y of the pads to zero
3)after double click on pad you can change the net of that pad to NO NET
Click to expand...


Thanks that helped me!
 
Remember you can use find similar object to search for all 'No Net' Pads and then use PCB inspector to change them all at once.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top