Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Making a csd call with sim900 not working

Status
Not open for further replies.
lucho1045

lucho1045

Junior Member level 3
Junior Member level 3
Joined
Feb 11, 2011
Messages
28
Helped
7
Reputation
14
Reaction score
7
Trophy points
1,293
Activity points
1,418
Hi people, I am working with two sim900 module but I can make them call each other trought a csd call. Has somebody done this?, Could you give some advice of how is the correct AT Commands sequence?. I really apreciated your help I am stuck on this about two weeks.

Thanks. Best Regards.
 

ATD0000000
Press Enter

without a semicolon will make a circuit swicthced call, and you should use

ATA
Press Enter

from the other module to answer the data call
 

Thanks but I do that and it doesnt work. Do I need a special simcard for CSD calls or a normal simcard with voice should work. Thanks...
 
  • Like
Reactions: kkny

    K

    kkny

    Points: 2
    Helpful Answer Positive Rating
CSD = Circuit swithced data call

which opens a data transfer channel between two modems or phones

ATDxxxxx without semicolon initialtes this call and ATA from the other module or modem will answer it

Regards
 
  • Like
Reactions: alexxx

    alexxx

    alexxx

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top