Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can we use more than 1 port in ie3d .................?

Status
Not open for further replies.
E

Ejazul Haque

Newbie level 2
Newbie level 2
Joined
Mar 12, 2012
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
GUNA
Activity points
1,292
can i use more than 1 port in a fractal antenna in IE3D?..
I could not found better result for a single port but i found the best result for 2 ports....
how to shift a frequency (ex. i need 900mhz but results are good for 990mhz. so how to shift frequency in this problem?)
plz help me as soon as possible...
 

you can shift your frequency by working on feed point and by slightly change of the lenth and the width of your patch.
and yes you can use 2 ports in ie3d but i dont think that using 2 port will be good option for getting the good results.
work more on the 1 port by doing this you will get more knowledge about the practical work.
 
Last edited:
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top