Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

dual rigid uwb horn antenna

Status
Not open for further replies.
W

WAQAS AHMED8979

Newbie level 5
Newbie level 5
Joined
Oct 18, 2011
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,362
hello:

i am new to antenna designing and currently designing dual rigid horn antenna. i am facing a little problem with the design equations of my antenna;. if someone can provide me with the design equatons or can tell me any software with which i can calculate the parameters of the antenna. i shall be very thankful to you people...............

Regards,
WAQAS AHMED
 

asslam o alikum

extremly sorry to distrub but if u can recomend me some material or some thing i would be thank full. i have to make a horn antenna at 10ghz frequency


kashif
 

Dear waqas i need simulation on dual rigided horn antenna on HFSS i have designed horn antenna but i dnt knw how to design rigided structure . Its a request if you can share your simulation of dual rigided horn antenna i will be thankfull
JazakaAllah
Regards
Ali Syed
 

Hello Waqas

find the simulation file of UWB dual ridge horn antenna from 6-18GHz. let me know if u find it useful

Regards
Elchiquito
 

Attachments

  • Quad_ridged.rar
    100.2 KB · Views: 220
elchiquito said:
Hello Waqas

find the simulation file of UWB dual ridge horn antenna from 6-18GHz. let me know if u find it useful

Regards
Elchiquito
Click to expand...

Where is the attached file? I could not see it?
Regards
 

Give me your Email, i will send it to you.

Regards
elchiquito
 
Thanks for your help. Have you worked on Vivaldi/Tapered Slot Antennas too? The problem we are facing with the horn is that while designing at 0.5-3 GHz the wave guide Dimensions and the flare Dimensions get very large-

Regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top