xeratule
Member level 4
- Joined
- Apr 4, 2009
- Messages
- 69
- Helped
- 1
- Reputation
- 2
- Reaction score
- 1
- Trophy points
- 1,288
- Location
- Istanbul / TURKIYE
- Activity points
- 1,975
Hi all,
I want to rectify my current sensor output to dc. When I power up the current sensor it outputs 2.5V dc value. When it senses current flown through it, output becomes a 50hz sinusoidal signal which has an offset of 2.5V. I want the sensor output to be at a dc level, so want to rectify that output. When I try to rectify it like doing AC signal using diode bridge, it does half wave rectification below 2.5V level. What I want it is to rectify it as fullwave and above 2.5V dc. How can I do that? Thanks in advance.
Regards
Erhan
I want to rectify my current sensor output to dc. When I power up the current sensor it outputs 2.5V dc value. When it senses current flown through it, output becomes a 50hz sinusoidal signal which has an offset of 2.5V. I want the sensor output to be at a dc level, so want to rectify that output. When I try to rectify it like doing AC signal using diode bridge, it does half wave rectification below 2.5V level. What I want it is to rectify it as fullwave and above 2.5V dc. How can I do that? Thanks in advance.
Regards
Erhan