Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

amc design to change the radiation pattern

Status
Not open for further replies.
A

antenna hfss

Newbie level 3
Newbie level 3
Joined
Feb 5, 2012
Messages
4
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,299
how can i design a cpw fed monopole antenna with amc as a back plane ?
 

you mean a printed monopole or a real monopole ?

anyway, there is a boundary called (Perfect M) which a perfect magnetic conductor

you can draw a 2d rectangle as a ground plane and assign this boundary to it

hope this helps!
 

flashking said:
you mean a printed monopole or a real monopole ?


I actually need to design an amc for a cpw fed monopole antenna for mobile phones at 2.3GHz. Yeah a printed one . The amc is to be used as a backplane or smthg.. I mean not as a substitute for ground plane.. could u please help me ?
Click to expand...
 

an AMC is an atrificial magnetic conductor

either you search for a practical design

or you can use the theoritical (Perfect M) boundary as I told you

here is a paper that might help you

"Effects of Artificial Magnetic Conductors in the
Design of Low-Profile High-Gain Planar Antennas
With High-Permittivity Dielectric Superstrate"
 
you are welcome, and give me a feedback as I am interested to see how this ends
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top