Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to implement circuit having dependent source in Proteus?

Status
Not open for further replies.
If go to the libray. Under simulator primatives, try selecting the CSOURCE (DC current source) You also haveone there called VSOURCE
(DC voltage source) and alter it as per normal. Either double click it or right click and properties
Its about the only way I can see of doing it

Hope that helps you

Allen
 

i am talking about Dependent sources. Voltage controlled voltage source is available in proteus library but i don't know how to use it in the circuit is have posted in my previous post.

Thankx Allen
 
  • Like
Reactions: rfjhh

    R

    rfjhh

    Points: 2
    Helpful Answer Positive Rating
Take a look atthe EASY HDl help file in the labcentre folder.
A quick read looks like you can do it but being tired Ihaven`t read all of it will look later
 
  • Like
Reactions: rfjhh

    R

    rfjhh

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top