Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to set acceleration time low & hight in Mitsubishi Freqrol A500 inverter ?

Status
Not open for further replies.
D

dineshdeshmuk

Full Member level 5
Full Member level 5
Joined
Sep 12, 2011
Messages
285
Helped
18
Reputation
36
Reaction score
18
Trophy points
1,298
Activity points
3,131
How to set acceleration time low & hight in Mitsubishi Freqrol A500 inverter ? (Acceleration Parameter)

How to go into the menu ?

thanks
 

Re: How to set acceleration time low & hight in Mitsubishi Freqrol A500 inverter ?

Download this

TRANSISTORIZED INVERTER
MITSUBISHI FR A-500
INSTRUCTION MANUAL
https://www.mrostop.com/pdfs/A500_manual.pdf


How to go into the menu ?
Click to expand...

Look 3.2 Operation Panel ............. page 53


4.1 Parameter Lists .....................page 64

How to set acceleration time low & high
Click to expand...

4.2.5 Acceleration/deceleration time ......................page 77
(Pr. 7, Pr. 8, Pr. 20, Pr. 21, Pr. 44, Pr. 45, Pr. 110, Pr. 111)
 
Re: How to set acceleration time low & hight in Mitsubishi Freqrol A500 inverter ?

kak111 said:
Download this

TRANSISTORIZED INVERTER
MITSUBISHI FR A-500
INSTRUCTION MANUAL
https://www.mrostop.com/pdfs/A500_manual.pdf




Look 3.2 Operation Panel ............. page 53


4.1 Parameter Lists .....................page 64



4.2.5 Acceleration/deceleration time ......................page 77
(Pr. 7, Pr. 8, Pr. 20, Pr. 21, Pr. 44, Pr. 45, Pr. 110, Pr. 111)
Click to expand...

thanks though
What does it mean by "7.5K or less & 11K or more " in the Parameter number column in page 77 ?
 

Re: How to set acceleration time low & hight in Mitsubishi Freqrol A500 inverter ?

What does it mean by "7.5K or less & 11K or more
Click to expand...
Please notice the inverter type designation, referring to output powers.
 

Re: How to set acceleration time low & hight in Mitsubishi Freqrol A500 inverter ?

What does it mean by "7.5K or less & 11K or more " in the Parameter number column in page 77 ?
 

Re: How to set acceleration time low & hight in Mitsubishi Freqrol A500 inverter ?

Some factory setting values of the parameters depends on the inverter capacity.

If noted on "The setting depends on the inverter capacity" ,
check inverter capacity from rating plate or capacity plate.

eg.
7.5K or less parameter value is xxxx
11K or more parameter value is xxxx

MitsuInverterCapacityPlate.jpg
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top