Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

WAveguide to Coax in HFSS

Status
Not open for further replies.
M

MobiNaz

Full Member level 3
Full Member level 3
Joined
Aug 11, 2010
Messages
163
Helped
5
Reputation
10
Reaction score
4
Trophy points
1,298
Location
SYDNEY
Visit site
Activity points
2,432
Hello all,

I am trying to design a wave guide to coax adapter. Should I use two port one for the waveguide end and the other at the coax and look at S21?

What parameter is critical in determining the accurate performance of the device?


Thanks in advance
 

Yes MobiNaz.

You would need two ports.simple because of the reason you would like to know the transmission coefficients from the transition. and also you would like to measure the bandwidth over which the transition works efficiently.

Regards
 
Given that the transition is almost lossless, you can also optimize for S11.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top