Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to operate sweep function in hfss?

Status
Not open for further replies.
A

aparnakrishna

Junior Member level 3
Junior Member level 3
Joined
Dec 10, 2011
Messages
27
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,449
pls help me to extrude a 2-d polyline to 3-d object.
 

Hi Aparna

There are couple of ways of doing it.try this

Select your 2-D polyline -->draw---->sweep---around vector or around line.

or pick a 2d surface to be extruded, Modeler---> surface---->movefaces---> and then appropriate option

Let me know if you need further help

Regards
Rotmanlens.
 
haiiiiiii,,
pls tell me the difference between sweep angle and draft angle.
actually I want to extend a 1 -d polyline to 3-d(tring to make blade of turbine).thickness of that blade is 2.5 degree.length 19cm.and the shaft on which it vil attach is having radius of 3 cm,and length of 1 cm.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top