Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

design of rectangular array of patch antenna using ADS software

Status
Not open for further replies.
A

abprhe

Newbie level 1
Newbie level 1
Joined
Jan 11, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
1)hey I designed a rectangular patch antenna of W= 29.34mm, L= 16.328mm, εr= 9.8, h(thickness)= 1.27mm, f0=2.2ghz... Im using a microstrip line feed of 50 ohm. I want to know what is the correct feeding point? how can i determine it? Is there a formula?
2)Wen i go for an array of antenna what should I do differently to feed them ?(2X2 array)
 

Hello Abprhe

There is an equation for inset point,if you would like to do inset feed or you can do impedance matching technique,look up the equations in" antenna theory by balanis" Equations are explained in detail.microstrip antennas.

There are many options for doing an array it depends whats your criteria.maybe a corporate feed.

Regards
Rotmanlens.

Regards
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top