Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Xilinx FIR Compiler IP

Status
Not open for further replies.
ravics

ravics

Advanced Member level 4
Full Member level 1
Joined
Sep 1, 2010
Messages
116
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,298
Location
Shangri-la
Activity points
1,852
What is the fomula for calculating Passband & Stop band in Filter Analysis Window of Xilinx FIR Compiler? It shows Passband & stop band values normalized between 0 & 1. What are optimal values?
fir.jpg
 

The values you see there are based on the coefficients YOU have to enter yourself (the right window of the first page of the IP core if I am correct).
You can select what portions of the graph/filter characteristics you want to show by changing these numbers.
There are no optimal numbers as such, but if you have a filter that has a 10% passband (and 90% stopband), then the numbers would be 0.0, 0.1, 0.1 and 1.0. But, it is just an analysis of (part) of the filter using your coefficients. So, changing these numbers does not change anything in your filter.
One way of generating these coefficients is using the FdaTool of MatLab (which also has it's own filter analysis).
 
  • Like
Reactions: ravics

    ravics

    ravics

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top