Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Halo,
I am working on DDR3 interface.
Do you know the difference between AC175 and AC150??
Why there is AC reading in high speed sginals, upto know I have only dealt with Vih(dc) and never used Vih(ac).
how to check the AC input logic high Vih(ac) in Oscillocope??
why are they using AC rating...
HP Server 24xCDROM
Hi,
Have you ever try to remove the old CDROM from machine and replace with DVD multirecoder drive.
I bought this server with old CDROM drive. I would like upgrade the server with DVD-rom..
DO you think, HP server proliant DL380 server will support DVDROM.
Cheers,
Tom
Hi,
use a uC, which provide a USB and FLASH interface.
then use the USB connector, USB phy for PC/laptop interface.
on other hand, use a array of flash ..
create a file system in uC to access the particular flash...
job done..
Tom
logicdevv.co.uk
EU contractor
Hi,
If your design is stuck or failed then you can use the **broken link removed** www.logicdevv_co_uk
They offer no fix no fees service and have a group of experts in Linux, FPGA, 32-bit processor, testing, PCB..
They maintain high level of security and protection for thier...
Re: ibis calculation
>if i use a 1v pulse at input i gets a 3v output but if i applies a 0.5 v output i gets 0v output
Ans: this model is not a functional base model. you cannot apply input and check output..
IBIS model is to check the In and out V/I charactierictic depedps upon load...
Contract Job in Europe
Hi,
If you are looking for contractor in Hardware design, FPGA and Embedded C..
Please mail you requriment/publish on following website...
They have good network of skill people..
Even if you are contractor based in Europe, you can mail your CV to be part of the...
opensource licence
Hello Experts,
From Long time I am having a question about the opensource..
What is the meaning of GPL license..
example web designer source--joomla..
can i use this software to create a website...
is everything is free for opensource user???
similarly, can I use the...
FPGA is suitable?
I have a processor interface and 2Mbit of register to design in FPGA.
Do you think this FPGA will do the job..
System gates:1Million
Df/f: 24000
RAM:144Kbits
Can you show, how to calculate the FPGA size Vs requirment??
Its urgent...
Tom
matlab vs labview
What is better ..
Matlab or Labview...
can you share the difference..
including cost, portablity, target market, software issue
Thanks,
Tom
IP core fees
Hi,
I am planning to create a FPGA based product.
I am good in VHDL & Hw design and very bad in cost valuation...
Can you suggest some point on
1. how to value the FPGA based design.
2. Do I have pay for EDA tool (Quartus II Web Edition)
3. How much fees to pay for IP core...
connecting lcd screen to pic microcontroller
Hi Buddy,
The main thing to find out is the type of LCD..
Now a days LCD comes with lots of interface..ex: LVDS, RGB, TTL, DVI interfcae..
now suppose if you are using LVDS interface LCD then you will need a chip like DS90C385A...
a transreciver...
job less (from UK)
Hello Team,
I am jobless from last few weeks...
After lots of trying I couldnt able to find one...
Can somebody suggest me on how to upgrade myself...
I have mix experience in FPGA, board design & Testing...
In which field I have to concentrate to get a better job...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
