Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by 786

  1. 7

    what is the significance of using Inverting Op-amp?

    what is the significance of using Inverting Op-amp instead of using Non-Inverting Op-amp? Does it realy makes any difference in amplification or what else? In one the design i found that, Inverting op-amp was used: +ve pin was grounded & -ve volatge was provided at -ve pin to get o/p in +ve...
  2. 7

    About 3 phase Bridge rectifier

    Can 3-phase Bridge rectifier work on Single Phase AC input???
  3. 7

    regarding Dc to DC conversion

    how is it possible to convert 600vdc to 230vdc? 600vdc is output of 3 phase, 3wire rectifier using diodes & input ac in 380v (i.e. line to line)
  4. 7

    analog signal to differential signal & compatible with R

    i have to change analog signal to differential signal and make it compatible with RS422 standard of communication. can anybody help. this is to be done using A/D converter i.e. first to convert analog signal to digital signal and this signal to make compatible with RS422 standard.
  5. 7

    PNP transistor operation

    pnp transistor operation i want to know the operation of PNP- actually its supply connections & current flow in comparison with NPN transistor. Please do specify the voltage & current relations with proper notations & +/- labels. thanks in advance
  6. 7

    wha if noise in RF ? - explanation needed

    noise what is noise - of course unwanted data or any disturbance - but what actually creates noise eg. there comes interference between two FM stations - however their carrier frequencies are different but still the FM channel gets interference? It's true that it can happen due atmosphereic...
  7. 7

    microcontroller protection

    microcontroller input protection how a microcontroller can be protected by voltage surges or spikes irrespective of use of regulated power supply - also regulators used in power supply have diodes in reverse? so what components to be used for protection of microcontrollers - using simple...
  8. 7

    about losses in regulator

    why does i/p voltage of any regulator always more than its output? may be it is because of losses - but what kind of losses ????????
  9. 7

    Why do voltage drop happen when length of connecting wire is big?

    Why do voltage drop happen when length of connecting wire is more e.g. if i have 12Vdc output and i want to connect to some device at a distance voltage gets drop, i know this happens but why?/ and what is solution to drive 12Vdc upto a certain distance??? please help
  10. 7

    About luminous intensity of LEDs

    How to increase luminous intensity of LEds- give practical solution- how to use PWM method for the same???
  11. 7

    What devices or components are used in SMPS?

    WHICH DEVICES OR COMPONENTS ARE USED IN SMPS
  12. 7

    How to enhance luminous intensity of LEDs?

    how to enhance luminous intensity of LEDs?

Part and Inventory Search

Back
Top