Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Charging 100 uF from the high side driver to 0.5CV^2 in the RC time must produce excessive current with low ESR and excessive V drop on high side. Try a soft start with an L and PWM
Charging 100 uF from the high side driver to 0.5CV^2 in the RC time must produce excessive current with low ESR and excessive V drop on high side. Try a soft start with an L and PWM
Charging 100 uF from the high side driver to 0.5CV^2 in the RC time must produce excessive current with low ESR and excessive V drop on high side. Try a soft start with an L and PWM
I have removed the capacitor n still get low voltage at my highside driver outputs. Could u redraw my schematics may b my connection of the high side is wrong but low side seems OK . highside is at spwm frequency of 16kHz,low side is at 50Hz
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
