-
Create a new project in Uvision and then open the project properties
write fromelf --bin -o @L.bin !L in the "run user program after build" command.
This command generates the bin file from the elf file
Create a MBED_Flash.bat with the following content and place it in the project folder
Now set the following dialog to use the bat file and write in the arguments @L.bin E:\ where E:\ is the mbed drive
Now when you press compile the bin file will be created in the project folder and when you press download the bin file will be copied to to the flash drive
That's it, press reset to see the code running
Create a new project in Uvision and then open the project properties
write fromelf --bin -o @L.bin !L in the "run user program after build" command.
This command generates the bin file from the elf file
Create a MBED_Flash.bat with the following content and place it in the project folder
Code:
:Batch file for copying to MBed
:argument 1: .bin output file
:argument 2: MBed root directory
copy %1 %2Now set the following dialog to use the bat file and write in the arguments @L.bin E:\ where E:\ is the mbed drive
Now when you press compile the bin file will be created in the project folder and when you press download the bin file will be copied to to the flash drive
That's it, press reset to see the code running