Continue to Site

Connection of Seven Segment Display for multiplexing

Blog entry Gallery

This circuit is to be used with the previous entry

There are no comments to display.

Mastering Design Rule Checking (DRC) for High-Quality IC Design
For signoff engineers in the integrated circuit (IC) industry, mastering Design Rule Checking...
Advanced Timing Signoff Techniques for Integrated Circuit Design
Achieving comprehensive Timing Signoff is crucial for ensuring that IC designs meet stringent...
Enhancing RTL Synthesis with Incremental Synthesis Techniques
As an RTL Synthesis engineer in the integrated circuit (IC) industry, leveraging Incremental...
Mastering Design-for-Test (DFT) Signoff in IC Design
As a signoff engineer in the integrated circuit (IC) industry, achieving comprehensive...
Enhancing RTL Synthesis with Physical Aware Synthesis Techniques
As an RTL Synthesis engineer in the integrated circuit (IC) industry, the adoption of Physical...

How to interface PIR modules with PIC microcontrollers
In this project a Passive Infrared (PIR) sensor is used to detect human movement and trigger an...
Using 74HC595 to expand output pins of a PIC microcontroller: Assembly code
This is actually a continuation of my blog entry https://www.edaboard.com/blog/1628/ where I...
How to expand I/O pins of a microcontroller using 74HC595 C Code
In this blog entry I will show you how to use a 74HC595 to expand I/O pins using only 3 I/O pins...
Use of Vref+ pin of PIC16F87xA ADC [applicable to all micro]
The maximum analog voltage you can give to your PIC (directly, without any divider) is 5V. So...
ADC Conversion Clock Select bit setting for PIC16F87XA, 18F2x2, 18F4x microcontroller
There is a fact to mention about the resolution of the A/D converter. Since the converter...

Copy URL BB code

Copy UBS BB code

This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.

Accept Learn more…

Top