Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Ferrite Transformer Rewinding Help

Status
Not open for further replies.
D

Deltatango

Junior Member level 3
Junior Member level 3
Joined
Jan 28, 2006
Messages
31
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,288
Activity points
1,588
Got a 350/400w half bridge Ferrite type transformer which needs a rewind, anyone suggest a company that might take it on.

Tried a few but they are too big to bother about such a small job, agreed its a unmarked China made item but was a very "game" supply for abuse until some flash-over took out a load of diodes etc.

Thanks for any help from.....

Davidt :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top