Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help with one shot circuit

Status
Not open for further replies.
C

compprod

Newbie level 1
Newbie level 1
Joined
Oct 23, 2006
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,292
I'm trying to design a circuit where when a toggle switch is turned on, it will trigger a relay for about a second, then disengage it.

The relay should not engage again until the toggle swith is turned off, then back on again.

I tried to modify a 555 one shot circuit, but it keeps re-triggering because of the lenght of time the switch is on, which could be hours.

Any help would be greatly appreciated. Thank you!
 

Maybe you could trying taking the control shot not from the relay directly but after a differentiatot (RC Cicruit) followed by a voltage clipper (Diode + R) to take only the off-on transistion.

i.e. Relay -> Differentiator->Negative level

94_1161638386.jpg
 

Hi Compprod,

You can choose from two circuits. If you are building it for yourself
you can use the second circuit, it has the advantage that you don't
need a PCB. If you are building it for somebody else, you gonna have to
go for the circuit with the timer because it will bring you more money.
And don't forget to put at least two leds in the circuit, the more leds
in the circuit, the more money you can get ! 8)

on1aag.

41_1161647029.GIF
 

    C

    compprod

    Points: 2
    Helpful Answer Positive Rating
Use high pass circuit to apply edge trigger to 555, you must add the protection diode otherwise you get negative voltage when the switch released
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top