Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to create standar cell in cadence ?

Status
Not open for further replies.
R

revooridinesh

Member level 1
Member level 1
Joined
May 31, 2010
Messages
41
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Canada
Activity points
1,553
HI

how to make the cells in the box in below image in a single row (like in standard cells) ?


Thanks

 

First of all, stick all instances together. It looks like digital standard cell so use them so. Pwell in the same direction, Nwell vice versa.
And if you'll route them just over their area, you can use it as standard cell after that.

Jirka
 

I see you built the circuit from library standard cells and then used the auto router. The output is not optimum...

Adjust your floorplan to match the combined size of the cells you are using, plus a bit extra. Your standard cell
will then be the same height as all the library cells, this will be more effective.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top