Continue to Site

Question about AT89S52 microcontroller

Status
Not open for further replies.
definetely you can use it without encoders and decoders, only if you take care of encoding and decoding in the software. its 100% possible , but may not be easy for begineers.
 

ckshivaram said:
definetely you can use it without encoders and decoders, only if you take care of encoding and decoding in the software. its 100% possible , but may not be easy for begineers.
Click to expand...
Thanks for the response but the code is already written
And about my second question what are the "write/edit" in the schematics? =) thnx!
 

this maybe for enabling encoding the data after the data is written completely. but this depends on the designer how the code is implemented. if you have the code then put it here, then someone can explain you.
 

ckshivaram said:
this maybe for enabling encoding the data after the data is written completely. but this depends on the designer how the code is implemented. if you have the code then put it here, then someone can explain you.
Click to expand...
Thanks for ur response.
I meant the edit and send on the circuit diagram what are they hardware?dip siwtch?buttons?
**broken link removed**
 

Yes they are push to on dip buttons (may be pcb mount) but rest of the stuff and related code is what needs attention.
 

ark5230 said:
Yes they are push to on dip buttons (may be pcb mount) but rest of the stuff and related code is what needs attention.
Click to expand...
what do u mean the rest needs attention? and I am going to use breadboard instead of pcb
santoshaxl said:
this project is working one i know where the problem is
Click to expand...
there is a problem?xD where is it?
 

edit and send is two simple push button switches did you complete the circuit diagram then you will notice where the problem is i want you to rectify where the problem is but don't worry i will help you sure .
 

santoshaxl said:
edit and send is two simple push button switches did you complete the circuit diagram then you will notice where the problem is i want you to rectify where the problem is but don't worry i will help you sure .
Click to expand...
can u tell me, what is wrong? Bcoz I still didnt buy all components
Thanks
 

code is wrong

---------- Post added at 13:22 ---------- Previous post was at 13:20 ----------

you want to change hardware or software ? if you don't want to change hardware you need change program or if you want to change hardware program is ok .
 

no they are different the one i have shown you works in uart mode but the one you have works on machester coding techniques ( you need encoder and decoder for data transfer)
 

santoshaxl said:
no they are different the one i have shown you works in uart mode but the one you have works on machester coding techniques ( you need encoder and decoder for data transfer)
Click to expand...
Hm , what are part No.s of ur tx and rx . If I cant find, what are the numbers of encoder and decoder I can use?
My Tx and Rx are TX433 and RX433 (ASK)
OR does can I do that thru software? That would be great help if that was the solution =)
thanks!
 
Last edited:

santoshaxl said:
no they are different the one i have shown you works in uart mode but the one you have works on machester coding techniques ( you need encoder and decoder for data transfer)
Click to expand...
Still waiting for ur respond, because I have to buy components thanks =)
 

i have also tried this project one year ago but after changing transmitter and receiver i succeed just buy the modules i have shown you that module works on uart mode
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top