Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Driver to the garage door based on Atmega8

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


It was originally planned for the garage door but it has many more applications. The system was to control two relays to change, supports limit switches and be compatible with radioline (optional).
The system has:
  • two outputs (left, right)
  • three inputs (left, right, stop) controlled by buttons or radioline
  • two inputs for limit switches NO (left, right)
  • two inputs for limit switches NC (left, right)
  • stabilized voltage outputs: 24v, 12v, 5v
  • three info diodes (left, right, stop)
The radioline doesn't need to have three channels, two channels are enough, because the STOP function is supported by activation of two inputs (left, right) at once.
The system works with 24W (24V – 1A) transformer. It's closed in box in the garage.



Link to original thread – Sterownik do bramy na Atmega8
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top