Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ADC to PC interface circuit plz...

Status
Not open for further replies.
B

Bhanumurthy

Full Member level 5
Full Member level 5
Joined
Jun 18, 2008
Messages
255
Helped
34
Reputation
68
Reaction score
20
Trophy points
1,298
Location
Subcontinent
Activity points
2,743
Hi All,
Plz tell me what is the appropriate interface circuit to interface ADC to a personal computer.The objective is - the output of ADC should be read as input by the C-program in PC.
Plz help me by sending few detailed circuits.

Regards.
 

you can use a micro controller to read adc value and it serially to the PC...
or there are serial ADC's available that you can directly interface to the PC via serial port....
such as MAX11102, MAX11103, etc...
 

Hi,

I have made a similar project. The Device is a AVR ATmega32 running a firmware which responds to requests from a PC. The interface is UART with a USB to UART bridge CP2102 on PC side.

The PC side software Visualize data in form of a graph using GDI

ADCGraphMainScreen.gif


ADCGraph2Schematic.gif


Hope this helps.

Download the package
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top