Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ATMega88 programming problem

Status
Not open for further replies.
N

nagaya

Newbie level 4
Newbie level 4
Joined
May 22, 2010
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,326
i tried to build a SIPROG with this circuit from (AVR Programmer)
avr_programmer_schematic.jpg

avr_socket_pcb.jpg


i used atmega88 with 4Mhz crystal
i'm using ponyprog on win7 and when i probe device it says test ok,but when i try to read device it says "device missng or unkown device"
i checked all connections with multimeter but there is no problem in connectivity too
 

nagaya said:
i tried to build a SIPROG with this circuit from (AVR Programmer)
avr_programmer_schematic.jpg

avr_socket_pcb.jpg


i used atmega88 with 4Mhz crystal
i'm using ponyprog on win7 and when i probe device it says test ok,but when i try to read device it says "device missng or unkown device"
i checked all connections with multimeter but there is no problem in connectivity too
Click to expand...
Thanks a lot bro!finally i found the problem,i just shorted 1N4148 and selected invert reset on ponyprog,it's working well now even in win7 :grin:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top