Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HD47780 Hardware or Software problem?

Status
Not open for further replies.
D

dksoba

Member level 2
Member level 2
Joined
May 5, 2010
Messages
47
Helped
3
Reputation
6
Reaction score
0
Trophy points
1,286
Activity points
1,743
I'm using c18 with a PIC18F4550 and using the C18 XLCD library. Checked my timings, they're to tolerance.

My LCD seems to have a problem, which I think I've had before, where some of the characters do not display right.

See video:

https://www.youtube.com/watch?v=3ClAUTR8_BE

I'm pretty confident it's a hardware problem, but please advise.

Thanks,
Matt
 

Yes, most probably is hardware issue.
 

Thanks for replying and confirming. I'm still pretty green at electronics but there's so much to learn!
 

With Optrex Lcd Display,if you have a garbage,is because you write too fast on your lcd,you need some delay,but your lcd is defect,try to remove metal case,with rubber pad under and clean wtih alcohol,some time work for me
 

No, is not hardware issue, if some of the characters do not display right you have a video card driver problem or you have a virus. Here **broken link removed** download AVG free, maybe will help you.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top