Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Design Simple band pass filter in CST Microwave Studio

Status
Not open for further replies.
K

kaandee

Member level 2
Member level 2
Joined
Oct 16, 2009
Messages
49
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,288
Location
Australia
Visit site
Activity points
1,594
Hi freinds

I have designed simple band pass filter using CST MWS 2008.
I used CST Microwave studio from CST design environment.
after design the band pass filter in CST microwave studio, there is another block (default) MWSSCHEM1.
How can i remove this. because when i click update button, it says "Unable to built S-matrix for block MWSSCHEM1" as shown in Figure 1

there is another problem in upper frequency limit as shown in figure 2
plz any one help me

Thank you

kaandee



 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top