Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

LRC meter software???

Status
Not open for further replies.
Borber

Borber

Advanced Member level 5
Advanced Member level 5
Joined
Dec 31, 1999
Messages
1,600
Helped
236
Reputation
474
Reaction score
111
Trophy points
1,343
Location
on third flor
Activity points
11,863
radio.ru/measure/6873

I need software for LRC meter published in Elektor 4,5,6/1997. Can somebody upload?
 

lrc meter

here is the binary for the eprom
now the only missing part is the code for the programable logic!

/Kyndal
 
lcr meter schematic

how did you get on with software location as i am contenplating in building this unit
(elektor lcr meter 1997)
 

elektor lcr meter

as it ended up. i had to buy both the eeprom and gal/pal from Elektor..
I posted the Eeprom code, but i dont think the pal/gal code is avaible anywhere :(

i finished the LCR and it works REALLY good once calibrated..

But for starters i would recoment you to locate the dificoult parts..

Picoampere diodes. The DSP and The Codec..
as these are Obsolete and hard to get.
i used another type of diodes. but i dont remember which. Sry.

everything else is off the shelve..

godluck It is a really good piece of equipment!

/Kyndal
 

radio.ru/measure/4319

can i get the circuit diagram for that meter ?
 

fcl meter

i would really like to help you more. but the thing is, that all my electronics
related stuff, is packed away in crates back in denmark. and i am in florida..
But i do know that i got it from the elector CD's which are also avaible on P2P networks, kazyaa, edonkey etc..
this also includes PCB layout. BOM etc..

if you are planning on making the pcb yourselve. you better have very good equipment, it is relatively big, and relativly fine dublesided board.
and through hole plating is nessesary atleast for the DSP and Codec, as the sockets for these will
be verry hard to solder without..

/Kyndal
 

lcr meter schema

such a shame all of the main parts for this meter are obsolete...
does anyone know of an actual lcr meter like elektor one but with actual parts ?
regards.
 

lrc metre

many thanks... very nice piece of hard/software !!!
would be nice to download it here.. once translated to english !!!
best regards.

I used babelfish to translate but it is still not fully readable... !
 

fcl-meter

HI

is provided file in the archive name .spl belong to sprint layout is i am or how i can open the file

regards
Fragrance
 

lcr-2 meter ru

*.spl is probably schematics file of sPlan
 

elektor rlc meter

would be *** very nice *** for some member here who understand russian to translate this project to english...
especially the .asm file, with comments in russian that are not translatable with babelfish or others...

the spl file is for sprint layout
available at https://www.abacom-online.de/uk/html/sprint-layout.html
with a FREE reader software

also would be nice if someone could translate this spl file layout to a pdf !!!!

very nice lcr meter project I think
I hope it can be extended in range with others aop, extended in frequency by using external sinus source
well...hope some other members will like it too...

Added after 7 minutes:

picture of this nice project
 

Attachments

  • 1057c50cd1d2_1690.jpg
    1057c50cd1d2_1690.jpg
    100 KB · Views: 2,885
rlc meter sound card

sprintlayout has .lay extension
here is spl
 

rlc meter software

yes you're right..
splan is also available at https://www.abacom-online.de/uk/html/splan.html
with also free reader

I wanted to say about the .lay file inside, the pcb artwork... can someone translate into pdf ?

the main thing, translate from russian the .asm file in the rar archive on the site...the other things are readable...:)
 

http.//pro-radio.ru.

this 93513.spl.GIF is not the project itself, it is "only" a capacitor (with esr ?) meter schematic. the actual schematic of the project is this file below
 

dspic lcr

and here is the asm file of the firmware to put in the pic
there are comments in russian I would really like to have in english...
nedd good help.. I can give points for that.
 

peaktech 2165

asm is translatable. Problem is cirillic encoding but it can be selected in IE if you open asm with it. Then you can use translator, sentence by sentence.
 

rlc meter

it's ok like that... I'm doing the translation and will post the result in a few days.
 

sound card rlc meter

Hire is all project: **broken link removed**
\hard\go_lrc_v1_0.spl - is the shematic Splan v6.0
\hard\go_lrc_v1_0.gif - the same sbematic in gif format
\soft\*.* software

Hire is pcb :**broken link removed**
Warning: The pcb is the test pcb with errors. Same wire makes additionally.
Sprint Layout v4.0
Sorry for my bat english.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top